Horizontal Oil Hot Water Boiler


Horizontal Oil Hot Water Boiler

How to use gas-fired boilers can improve the thermal efficiency of the gas boiler is also bad choice will directly affect its thermal efficiency, so we are in the process of buying, be sure to choose good quality. In fact, the factors affecting it improves the thermal efficiency of many, so we regularly thermal conductivity of the gas boiler for cleaning and maintenance, etc., so as to extend its service life. Selection of good thermal and oxidative stability, strong anti-coking. Be careful not to choose odor and color depth of the election furnace. Life with carbon residue, an acid value, flash point, viscosity 4 measure. Make semiannual oil testing, in order to grasp the good quality operation. Identify problems and timely replacement, and find out the reasons and preventive measures in advance deterioration. At the same time it must strictly do not mix different product numbers to use. When used in strict accordance with the rules furnace, to avoid emergency fire heating (temperature rise rate which should be controlled at l0 ~ 40 ℃, h), over-temperature, over-pressure, to take emergency shutdown measures quickly and decisively, always observe the oil level and the oil expansion tank temperature. Such as the lack of oil should be added. Prevent air and water into the oil circulation system. It will accelerate the reaction (the oxidation rate at two-fold increase for each increase in L0 deg.] C temperature) after direct contact with air because of high temperature, high temperature oil to prevent direct contact with air. A better approach is inflated with nitrogen gas to the upper space of the sealed tank. Forming a protective gas layer, sealed under nitrogen unconditionally. To header tank temperature generally does not exceed 60 ℃, header tank is not directly connected in series within the circulatory system. Improve the thermal efficiency of the furnace hot oil boiler, timely removal of the inner wall of the furnace, plate line grime on the walls, in order to ensure good heat transfer, and should use a better quality of gas as far as possible, so that the heat generated by the combustion of coal in time, fully passed to it.

We learned that recently, the city of Wuwei in Tianzhu county government announced that it will carry out a comprehensive coal-fired boiler demolition "clear" action aimed at remediation efforts to increase coal-fired boilers, and resolutely fight pollution control tough fight, complete coal-fired boilers out of the grid, clean energy transformation of the task of governance and compliance. The task of governance staff, shimenzhen government, Hua Temple town government organization done by the Bureau of Wuwei City, the ecological environment will Tianzhu Branch, and Hua Temple shimenzhen government and town homes for the elderly failed fork Station coal-fired boilers were concentrated tear down. To continue to improve the air quality of the environment, protect the health of the people made great contributions.

Tianzhu County will further promote the comprehensive improvement of coal-fired boilers, and through the elimination of the demolition, clean energy transformation, environmental compliance management, etc., with the completion of the internal area of ​​coal-fired boiler remediation tasks, achieve discharge standards in all coal-fired boilers. Meanwhile, the industrial park central heating, phasing out central heating, and for 10 tons of steam coal-fired boilers in the gas pipeline network coverage.

Up to now, Tianzhu County by incorporating central heating, clean energy transformation, compliance management, has completed the renovation of 74 coal-fired boilers. The remaining four coal-fired boilers in Tianzhu Force has developed a program of clean energy for heating reconstruction project, planned in June renovation, completed in August.

Features horizontal hot water boiler description: hot water boilers currently on the market are mainly classified according to different fuels, which are divided into electric water boiler, gas hot water boiler, hot water boiler fuel oil and coal-fired hot water boilers. Fuel (gas) hot water boiler diesel or natural gas as fuel, the water is heated by a burner, to provide heating and to achieve life, bath with hot water, a high degree of intelligence boiler, heating speed, low noise, no dust. Today small introduction pressure hot water boiler composed of four characteristics;

Hot water boiler belongs to special equipment, and is also a kind of high temperature and high pressure thermal energy equipment. It is inevitable that some faults will occur in the process of operation, which are normal, but it is very likely that the explosion of horizontal hot water boiler will occur if it is not properly dealt with. Therefore, for equipment safety and personal safety, we must understand some prevention hot water boiler explosion common sense. In the design of hot water boiler, thermal calculation and strength calculation should be carried out strictly according to the requirement, the structure layout should be reasonable, and the material selection should be qualified. In order to ensure the boiler quality conforms to the drawing, the boiler should be constructed according to the drawing. The degree of delimitation. Boiler safety accessories should be complete, agile and reliable, and on-time maintenance, frequent inspection, failure of accessories should be replaced in a timely manner. Repair and repair the boiler inside and outside the boiler according to the schedule, repair and reform the existing problems in time to ensure the quality of inspection. 2. Fuel oil and gas-fired hot water boiler explosion accident in furnace to prevent explosion of hot water boiler should be carefully checked before the point of the hot water boiler, whether the oil path is tight (leakage), the pressure is normal or not, and the newly installed and modified oil and gas pipelines must be blown clean. Check whether the blower has been ventilated for 5 minutes before ignition, and analyze the reasons after ignition failure, and then follow the ignition procedure to penetrate the air. Ignite. For boilers that have not been certified for boiler use and annual inspection, the grater has the right to refuse to light the furnace. The enterprise should lay down the experienced stoves who have rich experience in the operation of the furnace. The staff of the furnace should step up the tour inspection, deal with the problems in time, prevent the flameout, and stop the fuel as soon as it is found out. The boiler shall be equipped with automatic protection devices, including automatic ignition, flameout protection, automatic combustion regulation and necessary interlocking alarm protection devices.

Other Products