3 Ton Lpg Fired Steam Boiler

3 Ton Lpg Fired Steam Boiler

Off-firing boiler gas is a combustible gas in the combustion rate is higher than the outlet speed generated during combustion, resulting in the original direction of the fuel toward the burner starts combustion, and the gas boiler is in operation when the low-load state , is more prone to fire off phenomenon.

Inter-regional Pingdingshan Coal Industry Group Co., Ltd. by the Pingdingshan Shenma Group and two Chinese top 500 enterprises founded by restructuring, cross-industry, cross-ownership and transnational business of large state-owned energy and chemical group, under the People's Government of Henan Province , is the most complete variety of coking coal, thermal coal production base, has Asia's largest chemical production base in nylon. Carefully selected and comparison, fast boiler Pingmei cooperation with party has chosen to provide a 2 tons of steam electric 3 ton lpg fired steam boiler (WDR2.0-1.25-II) by a fast side.

Third, the heating mode

Now more popular heating methods are: heating and air conditioning, heat sink (radiator) heating and underfloor heating. Three methods have their own characteristics, heat from the boiler equipment, it should be noted that the temperature difference between these three issues arising heating methods.

Common thermal efficiency of gas-fired at about 80% -90%, since the exhaust gas temperature at the boiler more than 100 deg.] C, with a lot of heat loss of exhaust gas, it is a waste. Condensing gas boiler is to improve the thermal efficiency of the boiler by reducing the exhaust gas temperature, flue gas dew point of 55 ℃ -60 ℃, and the main component of natural gas is methane, a large amount of water when burned above the dew point of the gas, If the exhaust gas temperature is reduced to below the dew point, water vapor in the flue gas will be liquefied in the heat, this part can be recycled heat, it again increases the thermal efficiency of the boiler (flue gases into the cooling water will condense boiler corrosion , requires special corrosion-resistant materials). Usually calculated boiler thermal efficiency is used in the low calorific value, i.e. no latent heat in the flue gas condensing boilers while absorbing sensible heat and latent heat in the flue gas, calculated condensing boiler by Equation thermal efficiency reached 100%, the current maximum thermal efficiency of 108.9%.

Other Products