1 Ton Oil Boiler


1 Ton Oil Boiler

Reform technology of coal-fired 1 ton boiler combustion mode retrofit of coal-fired boiler by means of this technology, proper pulverized coal can be injected into the proper position of furnace chamber, and appropriate suspended combustion can be added on the basis of furnace row layer combustion, which can achieve a certain energy saving rate. For fuel oil and gas-fired boilers, the old and backward burners can be replaced by new energy-saving burners.

Steam 1 ton boilers and thermal oil heaters which is better? Which is more energy-efficient? Steam boilers and thermal oil heaters, which is more fuel cost savings? At the same power (represented with evaporation) for comparing the boiler, HTF medium because of the high temperature, so that the temperature of the steam exhaust gas temperature than the exhaust gas with a higher heating power of the boiler, the exhaust gas temperature directly affects Thermal efficiency. That same power (represented with evaporation) conditions, the efficiency is not high efficiency oil boiler steam boiler. In fact, now you finally choose what kind of boiler is required to rely on the temperature of your decision. If you ask a medium temperature to 300 degrees, you can only choose oil furnace; if you think there is a live medium temperature of 180 degrees is enough to use, it is recommended that you choose a steam boiler, because it is more energy-efficient with conditions). These are the kind of steam boilers and thermal oil heaters and today we analyze all the information of more energy-efficient, and the above information indicates that the steam boiler more energy saving, more fuel-efficient.

A rated working pressure of the 1 ton boiler steam pressure in the boiler should be greater than the sum of the plate for the steam production required for the pipeline resistance and operating pressure. Do not neglect the steam pipe resistance, because the higher rated steam pressure, saturated steam temperatures will also increase. Second, the boiler heating surface heating surface (heat transfer area) is an important boiler (design) parameters. Because of the large output of Boilers generally large overload capability; otherwise, output is small. Same boiler capacity, a relatively large heating area, a lower exhaust gas temperature, the higher the efficiency of the boiler, fuel combustion heat is more fully utilized, consumes less. Third, boiler blowdown boiler blowdown is clean the inside, remove the sludge, reducing the effective measures of scale. Fourth, the construction furnace boiler furnace tube diameter is also one of the very important (design) parameters. After a lot of boiler running for some time in the furnace coke, smoke pipe soot accumulated soot, black smoke even began, will be a waste of fuel. The main reason is the diameter of the furnace small, atomized oil particles had a chance to be injected into the combustion furnace wall caused by high temperature carbonization. Thus, when selecting a gas boiler furnace to select a larger diameter.

Wuhan Yu Dahua Group Co., Ltd. is a cotton based, weaving, knitting and textile car decoration installation in one of the cross-industry, diversified and comprehensive export-oriented enterprise groups. 2017, the Group expanded production scale textile processing, the number of new production lines, the Group's original steam 1 ton boiler can not meet the growing demand of orders in urgent need of a new steam boiler purchase. When selecting vendors steam boiler, the boiler output device side fast sustainable high quality steam attracted, decided to cooperate with the fast boiler. Fast art by side to the user site needs analysis, to provide two integrally condensing gas steam boiler (WNS4-1.25-Y.Q).

Other Products